리퍼비시 계측기
리퍼비시 계측기
01131-81506
- Model01131-81506
- MakerAgilent
- DescriptionResistor for solder-in single-ended probe head (medium bandwidth, 150 Ω)
- Rental문의요망
- Stock문의요망
Resistor for solder-in single-ended probe head (medium bandwidth, 150 Ω)
Solder-in 150 Ohm and 0 Ohm Medium Bandwidth Resistors
The following part number resistors must be trimmed and bent as shown in
figure 1-5.
• 01131-81506 (150 Ohm)
• 01131-81504 (0 Ohm)
The equipment required is:
• Exacto knife
• Agilent supplied template included with resistors
• Magnifying device
• Tweezers (2)
The instructions for trimming and bending the resistor are:
1 Using tweezers, place resistor body inside the rectangle of the trim
template.
2 Using the Exacto knife, trim the leads even with the trim lines.
3 Place resistor body inside the rectangle of the bend template.
4 Using another pair of tweezers, bend the 8.89 mm (0.360 in) lead 90
degrees.
