리퍼비시 계측기
리퍼비시 계측기
Others
1515
- Model1515
- MakerWaters Corporation
- DescriptionIsocratic HPLC Pump + 2414 Refrative Index Dector + 2707 Autosampler
- Rental문의요망
- Stock문의요망
1500 Series HPLC Pump
1515 Isocratic HPLC Pump는 1525 Binary HPLC Pump와 동급 성능을 제공하는 isocratic 펌프입니다. On-board pulse dampening 및 효율적 혼합(mixing)의 통합형 고압 바이너리 펌프 (integrated, high-pressure binary pump)입니다. Analytical부터 semi-preparative 유속까지 펄스없는 용매 흐름을 주므로 고감도 검출기에 적합합니다.
일반적인 HPLC 응용의 2 ~ 4.6mm I.D. 컬럼용으로 설계되었으며 이 펌프의 프로그래밍할 수 있는 유속 범위는 0.00 ~ 10.00mL/분(0.01mL씩 증가)입니다.
옵션 기능:
- 정확하고 일정한 컬럼 온도를 유지하는 20 ~ 60°C 온도 범위의 1500 시리즈 컬럼 히터
- 이동상에서 탈기된 기체를 제거하여 성능 및 신뢰성을 개선하는 진공 탈기 장치(vacuum degasser)
- Seal wash자동화로 안정적인 작동을 위한 primary seal의 수명 연장
- Manual injector
워터스에서는 사용하기 쉽고 안정적인 고성능 바이너리(binary) 및 등용매(isocratic) 펌프를 제공합니다. 통합형 고압 바이너리 (high-pressure binary) HPLC 펌프는 온보드 펄스 완충 (pulse dampening) 및 효율적 혼합이 특징이며, 파동 없는 용매 흐름을 주므로 대단히 민감한 검출기에 적합합니다. 등용매(isocratic) 버전에서도 동일한 성능을 얻을 수 있습니다.
| 펌프명 | 유속 |
| 1525 Micro Binary HPLC Pump | 낮은 유속 |
| 1525 Binary HPLC Pump | 표준 analytical 유속부터 Semi-preparative 유속까지 |
| 1525 with Extended Flow Heads | 표준 analytical 유속부터 Semi-preparative 유속까지 |
| 1515 Isocratic HPLC Pump | 표준 analytical 유속부터 Semi-preparative 유속까지 |
T1500 펌프 시리즈는 다음을 제공합니다:
- 듀얼 피스톤의 정확한 스텝형 모터 제어(48 단계/µL 분리능)
- 부드럽고 일정한 용매 이송을 위한 타원형 (non-circular) 드라이브 기어
- 정확하고 일정하게 컬럼 온도를 유지하는 20 ~ 60°C 온도 범위의 1500 시리즈 컬럼 히터 옵션
- 이동상에 용해된 기체를 제거하여 성능 및 신뢰성을 개선하는 진공 탈기 장치 (vacuum degasser) 옵션(1525µ에서는 표준)
- 안정적인 작동을 위해 primary seal 수명을 연장하는 seal wash 자동화 옵션
이 펌프들은 Waters Sample Manager, 검출기 및 워터스 소프트웨어 (Breeze™, Empower™ 및 MassLynx™)와 함께 사용할 수 있습니다.
1500 Series HPLC Pumps
| Pump Name | Flow Rate |
| 1525 Micro Binary HPLC Pump | Low flow rates |
| 1525 Binary HPLC Pump | Standard analytical flow rates to Semi-preparative flow rates |
| 1525 with Extended Flow Heads | Standard analytical flow rates to Semi-preparative flow rates |
| 1515 Isocratic HPLC Pump | Standard analytical flow rates to Semi-preparative flow rates |
Specifications:
| OPERATING SPECIFICATIONS | |
| Number of eluents | 1515: One 1525: One or two |
| Programmable flow rate range | 0.00 to 10.00 mL/min in 0.01 mL increments |
| Flow precision | ≤ 0.1% RSD or 2 sec SD, six replicates, based on retention time or volumetric measures, at 1.0 mL/min, 1000 to 2000 psi backpressure, PQ test (each pump individually) |
| Flow accuracy | ± 1.0% of setting at 1.0 mL/min or 30.0 μL/min, whichever is greater, using degassed methanol, 1000 to 2000 psi backpressure (each pump individually) |
| Maximum operating pressure | 6000 psi (41,370 kPa, 401 bar) |
| Operating pressure limits | Software programmable high and low pressure limits; user selectable in psi, kPa, bar < |
| Delay volume (1525) | 200 μL (with one GM 150 mixer) |
| Gradient compositional accuracy (1525) | ± 0.5% of setting at 1 mL/min and 1000 psi backpressure (methanol:methanol with propylparaben) with one GM 150 mixer |
| Gradient compositional precision (1525) | < 0.5% RSD of setting at 1.0 mL/min and 1000 psi back pressure (methanol:methanol with propylparaben) with one GM 150 mixer (based on six replicates of compositional accuracy) |
| Pressure ripple (one pump) | ≤ 2.0% at 1.0 mL/min, degassed methanol, at 1000 psi backpressure |
| Gradient ripple | < 1.5% normalized to full scale between 10% to 90%, 1.0 mL/min, and 1000 psi backpressure (methanol:methanol with propylparaben with one GM 150 mixer) |
| 1525μ Binary HPLC Pump | |
| OPERATING SPECIFICATIONS | |
| Programmable flow rate | 0.00 to 5.00 mL/min, in 0.01 mL/min increments |
| Flow precision | 2 sec SD, six replicates based on retention time or volumetric measures at 0.2 mL/min, 1000 to 2000 psi back pressure, PQ test (each pump individually) |
| Flow accuracy | 2.0% of setting at 0.1 mL/min using degassed methanol at 1000 to 2000 psi backpressure (each pump individually) |
| Maximum operating pressure | 6000 psi (41,370 kPa, 401 bars) |
| Operating pressure limits | Software programmable high and low pressure limits; user selectable in psi, kPa, bar < |
| Delay volume | 30 μL (without mixer), < 100 μL (with one 50 μL mixer) |
| Gradient accuracy | < 1.0% of setting (typical) at 0.1 mL/min between 10% to 90%, and 1000 psi backpressure (methanol:methanol with propylparaben and one 50.0 μL mixer) |
| Gradient precision | < 0.5% RSD (typical) between 10.0% to 90.0%, 0.1 mL/min, and 1000 psi backpressure (methanol:water with octanophenone and one 50.0 μL mixer) |
| Pressure ripple (one pump) | < 2.0% at 0.5 mL/min, degassed methanol, at 1000 to 2000 psi backpressure |
| Gradient ripple | < 1.5% normalized to full scale between 10.0% to 90.0%, 0.1 mL/min, and 1000 psi backpressure (methanol:methanol with propylparaben) with one 50.0 μL mixer |
| INSTRUMENT CONTROL | |
| Communications | Ethernet, IEEE-488 |
| External control | Empower™ Breeze™ or MassLynx™ Software |
| Event I/O | Back of instrument Detachable terminal strip |
| PHYSICAL / ENVIRONMENTAL SPECIFICATIONS | |
| Physical size (without bottle holder) | Height: 30.5 cm (12.0 in.) Depth: 61.0 cm (24.0 in.) Width: 43.0 cm (17.0 in.) |
| Weight | 1515: 20.4 kg (45.0 lbs) 1525: 27.2 kg (60.0 lbs) |
| Wetted surface material | 316 stainless steel, sapphire, reinforced fluorocarbon polymer seals, carbon-reinforced Tefzel < |
| Acoustic noise | 70 dB(A) |
| Operating temperature range | 4 to 40 °C |
| Operating humidity range | 20% to 80%, non-condensing |
| 1500 Series Manual Injector (Applicable for 1515 and 1525) – Rheodyne 7725I Injector | |
| OPERATING SPECIFICATIONS | |
| Inject switch | Contact closure, pre-wired |
| Mounting | Integral for 1500 Series HPLC pumps |
| Sample holdup | Zero |
| Flow during switching | Continuous, make-before-break |
| Injection | Partial or full loop |
| Loop size | 20 μL (standard) Changeable (5-, 50-, and 200-μL loop supplied) |
| Wetted materials | 316 ss, ceramic, inert polymers |
| Waters 1500 Series Column Heater | |
| OPERATING SPECIFICATIONS | |
| Set point temperature range | 20 to 60 °C; set ≤ 5 °C above ambient temperature |
| Temperature accuracy | ± 0.80 °C |
| Temperature precision | ± 0.25 °C |
| Pre-column heating of mobile phase | ± 0.50 °C of column temperature up to 5.00 mL/min |
| Pre-heat tube volume | Approximately 35 μL |
| Column capacity | Up to four 7.8 mm x 300.0 mm without guard columns Two columns with guard columns |
| PHYSICAL SPECIFICATIONS | |
| Dimensions | Height: 43.0 cm (17.0 in.) Depth: 35.6 cm (14.0 in.) Width: 15.2 cm (6.0 in.) |
| Weight | 5.9 kg (13.0 lbs) |
| ELECTRICAL SPECIFICATIONS | |
| Input voltage range | 120/240 VAC |
| Input frequency range | 50/60 Hz |
| INSTRUMENT CONTROL | |
| Communications | Ethernet, IEEE – 488 |
