리퍼비시 계측기

리퍼비시 계측기

4352B

  • Model4352B
  • MakerAgilent
  • DescriptionVCO/PLL Signal Analyzer 10Mhz - 3Ghz
  • Rental문의요망
  • Stock문의요망

The Agilent 4352B test system can evaluate the characteristics of VCOs and PLLs that are essential to designing local oscillators used in RF wireless communication equipment. This system can provide both powerful analyzing capability for design evaluation in LAB and high-speed measure-merit capability for production line test with 2 operating modes, “Signal Analyzer” and “VCO Tester” mode.

The Agilent 43525, which consists of the Agilent 4352B VCO/PLL Signal Analyzer and Hewlett-Packard low-noise signal generator controlled by the Agilent 4352B, covers up to 3 GHz and can measure the main VCO/PLL evaluation RF power, frequency, phase noise, spectrum, frequency transient, DC consumption current and FM deviation. In addition, the Agilent 4352B provides and controls the DC power supply, the low-noise DC control voltage source and the 1 kHz signal source necessary for VCO tuning characterizing. This system can make high-speed measurements thanks to the dedicated firmware and “carrier lock multi-mode PLL” technology for phase noise measurement that enables the system lock unto the carrier of the measured signal automatically.

In addition, the Agilent 4352B has excellent phase noise performance such as -157 dBc/Hz at 1 MHz offset typically, so that this test system can make reliable slid repeatable phase noise measurement. The 4352B can measure 801 measurement points from 100 Hz to 10 MHz offset in 7.4 seconds/sweep.

And adding the Agilent 71707A Microwave Down converter expands its frequency range up to 26 GHz. Besides the powerfull phase noise measurement capability, the Agilent 43525 can measure frequency transient with 50 Hz frequency resolution and 12.5 micro seconds time resolution.

  • 100 MHz to 3 GHz measurement range
  • 1 kHz signal source
  • Evaluates the characteristics of VCOs and PLLs that are essential to designing local oscillators used in RF wireless communications equipment
  • Operates in either Signal Analyzer or VCO tester modes up to 3 GHz
  • When configured with the HP 43521A downconverter unit, system can operate from 10 MHz to 12.6 GHz
  • Provides and controls the DC power supply, the low noise DC control voltage source and the 1 kHz signal source necessary for VCO tuning characterizing
  • Excellent phase noise performance (-157 dBc/Hz at 1 MHz offset)
  • Automatic measurement capability and power analysis functions are included

    회사명

    부서명

    구매문의판매문의렌탈문의수리문의교정문의

    전화상담방문상담견적서상담

    문의 및 요청내용 *

    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.