리퍼비시 계측기

리퍼비시 계측기


  • Model543-474B
  • DescriptionDigimatic Indicator ID-C
  • Rental문의요망
  • Stock문의요망

Product Highlights

  • Resolution 0.01mm
  • Range 0-25mm
  • Contact Point Stem 8mm M2.5 x 0.45 Thread
  • Accuracy 0.03mm
  • Measuring Force Less than 1.8N
  • As compact as standard Series 2 dial indicators.
  • Large, easy-to-read LCD.
  • GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
  • The positive/negative count resulting from the spindle™s up/down movement can be toggled.
  • Internal calculations using the simple formula of [F(x)=Ax)] are available
  • Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
  • The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading.
  • With SPC data outpu

• Display: 6-digit LCD, sign
• Contact point: Spherical tip SR = 1.5mm (carbide tipped),
part No. 901312 (for ISO/JIS Type)
part No. 21BZB005 (for ANSI/AGD Type)
• Spindle orientation for measurement:
– Standard model that has a 12.7mm measuring range: No restrictions
– Standard model that has a 25.4mm or 50.8mm measuring range: Normally
at any position between the spindle pointing vertically downward to the
spindle horizontal. To perform measurement with the spindle pointing above
the horizontal requires a reverse-position coil spring (special accessory).
– Low measuring force models: See ‘Setting measuring force on low
measuring force models’ on page 5

• Position detection method: Capacitance type absolute linear encoder
• Battery: SR44 (silver oxide button cell) × 1, part No. 938882
• Battery life: Approximately 7,000 hours of continuous use
• Maximum response speed: Not restricted (except for scanning measurement)
• Service temperature range: 0 to 40°C
• Storage temperature range: 0 to 60°C


    문의 및 요청내용 *

    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.