리퍼비시 계측기

리퍼비시 계측기

6060B -1

  • Model6060B
  • MakerHP
  • Description300 Watt DC Electronic Load
  • Rental문의요망
  • Stock문의요망

This product will be discontinued on July 1, 2016. The recommended substitute solution is N3301A with N3304A.

These electronic loads are particularly suited for the lab bench. Entering commands manually using the front panel keypad is simpler because the channel does not need to be specified, as in a mainframe configuration. Extensive protection is included to help protect your valuable prototypes under test. This includes overvoltage, over current, over temperature, overpower, and reverse polarity.

The Keysight 6060B is a 300 W, single output electronic load, ideal for evaluation of DC power sources and power components in bench applications. The 6060B has built-in measurement functions that make it convenient for testing single output applications in areas such as research and development, production, and incoming inspection.

The Keysight 6060B loads are suitable for manufacturing test systems where maximizing speed is not critical. They use industry standard SCPI instructions, and also have VXI Plug & Play drivers to simplify system design. For the greatest speed and accuracy in programming and measurement, see the DC Electronic Loads. 

Output Ratings

  • Current: 0 to 60 A
  • Volts: 3 to 60 V
  • Maximum power: 300 W

Constant Current Mode

  • Ranges: 0 to 6 A, 0 to 60 A
  • Accuracy: 0.1% +/-75 mA
  • Regulation: 10 mA

Constant Voltage Mode

  • Accuracy: 0.1% +/-50 mV
  • Regulation (w/remote sense): 10 mV

Constant Resistance Mode

  • Ranges: 0.033 to 1 Ω/ 1 to 1,000 Ω / 10 to 10,000 Ω
  • Accuracy: 1 Ω and 10 KΩ: 0.8% ±8 mΩ (with ≥6A at input) / 1 KΩ: 0.3% ±8 mS (with ≥6V at input)

Opt 020 Front panel DC input connectors
Opt 100 87 to 106 VAC, 47 to 66 Hz input (for Japan only)
Opt 120 104-127 VAC, 47 to 66 Hz
Opt 220 191 to 233 VAC, 47 to 66 Hz input
Opt 240 209 to 250 VAC, 47 to 66 Hz input
Opt 0L1 Printed operating manual and programming guide
Opt 0B3 Printed service manual
Accessories
1CM002A* Rack mount flange kit 88.1 mm H (2U) – two flange brackets; 1.75 Inch hole spacing
1CP001A* Rack mount flange and handle kit 88.1 mm H (2U) – two brackets and front handles
E3663AC Support rails for Keysight rack cabinets

    회사명
    부서명

    구매문의판매문의렌탈문의수리문의교정문의
    전화상담방문상담견적서상담
    문의 및 요청내용 *

    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.