able 4-1 ECal Module Torque Wrench Information
Connector Type Torque Wrench
Part Number
Wrench
Opening Torque Setting Torque Tolerancea
a. Many older Agilent calibration module manuals list different torque tolerances for the
various torque wrenches. The correct torque tolerance for Agilent torque wrenches is
±10% of the torque setting as listed in this table.
3.5 mm, 2.92 mm,
2.4 mm, 1.85 mm
(test port)
8710-1764 20 mm 90 N-cm (8 in-lb) ±9 N-cm (±0.8 in-lb)
3.5 mm, 2.92 mm,
2.4 mm, 1.85 mm
(adapters)
8710-1765 5/16 in 90 N-cm (8 in-lb) ±9 N-cm (±0.8 in-lb)
Type-N 50, 75 Ω 8710-1766 3/4 in 135 N-cm (12 in-lb) ±13.5 N-cm (±1.2 in-lb)
7 mm 8710-1766 3/4 in 135 N-cm (12 in-lb) ±13.5 N-cm (±1.2 in-lb)
7-16 8710-2174 1 1/16 in 226 N-cm (20 in-lb) ±22.6 N-cm (±2 in-lb