리퍼비시 계측기

리퍼비시 계측기

8714ET – 100

  • Model8714ET
  • MakerAgilent
  • DescriptionRF Vector Network Analyzer, 300 kHz to 3 GHz
  • Option100
  • Rental문의요망
  • Stock문의요망

The Agilent 8714ET, RF Network Analyzer, features a transmission/reflection test set with a full range of magnitude and phase measurements and employs advanced vector-error correction techniques to enhance measurement accuracy.

  • Impedance of 50 ohms and a frequency range of 300 kHz to 3.0 GHz
  • Dynamic range up to 100 dB
  • Narrowband and broadband detection
  • Real-time swept speeds
  • Built-in 1 Hz resolution synthesized source
  • Standard LAN interface
  • Standard GP Instrument BASIC
  • Built-in 3.5 inch disk drive

Fault location and structural return loss
(Option 100)
For fully characterizing cable performance and antennafeedline systems, this option provides both fault-location
and structural-return-loss capability. Fault-location measurements help identify where cable or system faults,
such as bends, shorts, or corroded or damaged connectors, occur. In addition to displaying faults in terms of
distance into the cable or feedline, the magnitude of the fault is also displayed.
Structural return loss is a special case of return loss(reflection) measurements, optimized for measuring
periodic reflections of small magnitude. These periodic reflections can occur from physical damage to the cable
caused by rough handling, or from minor imperfections imparted during the manufacturing process. Structural
return loss problems occur when these periodic reflections sum at half-wavelength intervals, causing high signal
reflection (and low transmission) at the corresponding frequency.

    회사명
    부서명

    구매문의판매문의렌탈문의수리문의교정문의
    전화상담방문상담견적서상담
    문의 및 요청내용 *

    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.