리퍼비시 계측기

리퍼비시 계측기

AFG2000

  • ModelAFG2000
  • MakerTektronix
  • DescriptionAFG2000 임의/함수 발생기
  • Rental문의요망
  • Stock문의요망

The AFG2021 Arbitrary Function Generator gives you the power to create the signals you need at an entry-level price. With 20 MHz bandwidth, 14-bit resolution, and 250 MS/s sample rate, you can generate all manner of signals — from complex serial data streams to simple audio frequencies or clock signals to the output of an airbag sensor during a crash. With 12 standard waveforms, modulation capability, and a built-in noise generator, you can quickly create the signal you need to thoroughly exercise your designs.

Notice to EU customers

This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.

This product does not comply with the RoHS 2 Directive 2011/65/ EU and will not be shipped to the EU. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available.

Key performance specifications

  • 20 MHz sine, 10 MHz pulse waveforms provide coverage for your most common applications
  • 250 MS/s sampling rate and 14-bit vertical resolution enable the creation of high-fidelity signals

Key features

  • The innovative UI reduces setup and evaluation time with direct access to frequently used functions and parameters
  • The internal 4 × 128 kS memory and the USB memory expansion capability provide substantial capacity for defining complex waveforms
  • USB remote control port and USB flash drive port are included. GPIB and LAN interfaces are available as an option
  • Built-in Modulation, Noise Generator, Burst, and Sweep modes for greater versatility
  • Built-in waveforms provide quick access to commonly used signals
  • Large 3.5 inch color screen displays both graphical and numeric waveform information simultaneously
  • Menu and online help in 8 languages
  • 2U height and half-rack width fits both benchtop and rack-mounted applications
  • Free ArbExpress software makes waveform editing and downloading extremely easy
  • Free SignalExpress software combines Tektronix bench instruments into a low-cost solution for automatic testing

Applications

  • Electronic test and design
  • Sensor simulation
  • Education and training
  • Functional test
  • System integration

Superior performance at an affordable price

Most electronic devices, circuits, and systems are designed to handle some form of a signal. These signals can be simple like an audio frequency or clock signal or more complex like a serial data stream or the output of an airbag sensor during a crash. With 20 MHz bandwidth, 14-bit resolution, and 250 MS/s sample rate, the AFG2021 Arbitrary Function Generator can create both simple and complex signals at an entry-level price. With 12 standard waveforms, modulation capability, and a built-in noise generator, you can quickly create the signal you need to thoroughly exercise your designs.

Intuitive user interface

The innovative ease-of-use features first seen on the AFG3000 Series arbitrary/function generators are the building blocks for the AFG2021, providing quick access to setup and operational features. Experienced AFG3000 users will find it especially easy to set up the new AFG2021. A 3.5 inch color TFT screen shows relevant parameters in both graphic and text formats, so you can have full confidence in your settings and focus on the task at hand. The front-panel shortcut buttons and rotary knob provide quick access to the most frequently used functions and settings.

Excellent frequency agility

Traditional function generators created their output signals using analog oscillators and signal conditioning. The Tektronix AFG2021 relies on Direct Digital Synthesis (DDS) techniques. DDS technology synthesizes waveforms by using a single clock frequency to generate any frequency within the instrument’s range. DDS architecture provides exceptional frequency agility, making it possible to program fast frequency and phase changes, which is useful for testing radio and satellite system components, amplifiers, and filters.

Frequency range from 1 μHz to 20 MHz, supports a wide range of amplifier and filter testing applications.

 

ArbExpress for real-world waveforms with minimal effort

With ArbExpress software, you can quickly create waveforms that can be copied to the AFG2021 to meet custom stimulus requirements. ArbExpress supports direct connection to Tektronix oscilloscopes and AFGs through USB, GPIB, or LAN. The software allows you to import real-world signals captured with an oscilloscope onto a PC, then edit and download them onto an AFG to duplicate the captured waveform. This is extremely useful for automotive, medical, and industrial applications where recreating sensor output is critical to analyzing the integrity of the design.

ArbExpress software helps you easily duplicate real-world signals.

 

Insert productivity with SignalExpress

Every AFG2021 ships with a free copy of the Tektronix Edition of National Instrument’s LabVIEW SignalExpress software for basic instrument control, data logging, and analysis. SignalExpress supports the range of Tektronix bench instruments enabling you to connect your entire test bench. You can then access each instrument from one intuitive software interface. This allows you to automate complex measurements requiring multiple instruments, log data for an extended period of time, time-correlate data from multiple instruments, and easily capture and analyze your results, all from your PC. Only Tektronix offers a connected test bench of intelligent instruments to simplify and speed debug of your complex design.

Connectivity

Using the front-panel USB host port, you can save your customized waveforms or instrument settings onto a USB memory stick. Reloading the data is easily done by plugging the device back into the USB host port. The USB device port and optional GPIB/LAN ports provide multiple alternatives for connecting the AFG2021 to your PC for waveform download and remote control.

Compact form factor

The 2U height and half-rack width form factor allow the AFG2021 to be stacked on other bench instruments, such as digital multimeters, power supplies, and frequency counters, saving valuable bench space. With the optional RMU2U rackmount kit, GPIB interface, and full SCPI support, the AFG2021 is a perfect solution for automated test systems.

Specifications 2

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Model overview

  AFG2021
Channels
Waveforms Sine, Square, Pulse, Ramp, Noise, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, and Haversine

General characteristics

Sine wave
1 μHz to 20 MHz
Sine wave in Burst Mode
1 μHz to 10 MHz
Effective maximum frequency out
20 MHz
Amplitude flatness (1 Vp-p)
<5 MHz
±0.15 dB (±0.05 dB, typical)
5 MHz to 20 MHz
±0.3 dB(±0.02 dB, typical)
Harmonic distortion (1 Vp-p)
10 Hz to 20 kHz
<-70 dBc (<-77 dBc, typical)
20 kHz to 1 MHz
<-60 dBc (<-72 dBc, typical)
1 MHz to 10 MHz
<-50 dBc (<-55 dBc, typical)
10 MHz to 20 MHz
<-40 dBc (<-55 dBc, typical)
THD
<0.2% (<0.15%, typical) 10 Hz to 20 kHz, 1 Vp-p
Spurious (1 Vp-p)
10 Hz to 1 MHz
<–60 dBc (<–71 dBc, typical)
1 MHz to 20 MHz
<–50 dBc (<–68 dBc, typical)
Phase noise, typical
20 MHz: <–110 dBc/Hz at 10 kHz offset, 1 Vp-p
Residual clock noise
–63 dBm
Square wave
1 μHz to 10 MHz
Rise/fall time
≤18 ns
Jitter (RMS)
<500 ps (<60 ps, typical)
Ramp wave
1 μHz to 200 kHz
Linearity
≤0.1% of peak output at 10% to 90% of amplitude range
Symmetry
0.0% to 100.0%
Pulse wave
1 mHz to 10 MHz
Pulse width
30.00 ns to 999.99 s
Resolution
10 ps or 5 digits
Pulse duty
0.001% to 99.999% (Limitations of pulse duty width apply)
Edge transition time
18 ns to 0.625 × Pulse Period
Resolution
10 ps or 4 digits
Lead delay
Range
Continuous Mode: 0 ps to Period Trigger/Gate Burst Mode: 0 ps to Period – [Pulse Width + 0.8 × (Leading Edge Time + Trailing Edge Time)]
Resolution
10 ps or 8 digits
Overshoot
<5%, typical
Jitter (RMS)
<500 ps (<90 ps, typical)
Other waveforms
1 μHz to 200 kHz
Noise bandwidth (-3 dB)
20 MHz
Noise type
White Gaussian
DC (into 50 Ω)
–5 V to +5 V
Arbitrary waveforms
1 mHz to 10 MHz
Arbitrary waveforms in Burst Mode
1 mHz to 5 MHz
Effective analog bandwidth
(–3 dB)
34 MHz
Nonvolatile memory
4 waveforms
Memory: sample rate
2 to 128 k: 250 MS/s
Vertical resolution
14 bits
Rise/fall time
≤20 ns
Jitter (RMS)
4 ns
Amplitude
Range

50 Ω load: 10 mVp-p to 10 Vp-p

Open circuit: 20 mVp-p to 20 Vp-p

Accuracy

±(1% of setting + 1 mV), (1 kHz sine waveform, 0 V offset, >10 mVp-p amplitude)

Resolution
0.1 mVp-p, 0.1 mVrms, 1 mV, 0.1 dBm, or 4 digits
Units
Vp-p, Vrms, dBm (sine wave only)
Output impedance
50 Ω
Load impedance setting

Selectable: 50 Ω, 1 Ω to 10.0 kΩ, high Z (adjusts displayed amplitude according to selected load impedance)

Isolation
<42 Vpeak maximum to earth
Short-circuit protection

Signal outputs are robust against permanent shorts against floating ground

External voltage protection

To protect signal outputs against external voltages use fuse adapter 013-0345-00

DC offset
Range

50 Ω load: ±(5 Vpeak – amplitude Vp-p/2)

Open circuit: ±(10 Vpeak – amplitude Vp-p/2)

Accuracy
±(1% of |setting| + 5 mV + 0.5% of amplitude (Vp-p))
Resolution
1 mV

Modulation characteristics

AM, FM
Carrier waveforms
All, including ARB, except pulse, noise, and DC
Source
Internal/external
Internal modulating waveform

Sine, square, ramp, noise, ARB (AM: maximum waveform length 4,096; FM: maximum waveform length 2,048)

Internal modulating frequency
2 mHz to 50.00 kHz
AM modulation depth
0.0% to +120.0%
Min FM peak deviation
DC
Max FM peak deviation
10 MHz
Pulse width modulation
Carrier waveform
Pulse
Source
Internal/external
Internal modulating waveform

Sine, square, ramp, noise, ARB (Maximum waveform length 2,048)

Internal modulating frequency
2 mHz to 50.00 kHz
Deviation
0% to 50.0% of pulse period
Sweep
Waveforms
All, including ARB, except pulse, noise, and DC
Type
Linear, logarithmic
Sweep time
1 ms to 300 s
Hold/return time
0 ms to 300 s
Max total sweep time (Sweep + hold + return)

300 s

Resolution
1 ms or 4 digits
Total sweep time accuracy, typical
0.4%
Min start/stop frequency

All except ARB: 1 μHz

ARB: 1 mHz

Max start/stop frequency

Sine: 20 MHz

Square: 10 MHz

ARB: 10 MHz

Others: 200 kHz

Burst
Waveforms
All, including ARB, except noise and DC
Type
Triggered, gated (1 to 1,000,000 cycles or infinite)
Internal trigger rate
1 μs to 500.0 s
Gate and trigger sources
Internal, external, manual trigger

Auxiliary input characteristics

Modulation input
Input range
All except FSK: ±1 V full scale

FSK: 3.3 V logic level

Impedance
10 kΩ
Frequency range
DC to 25 kHz (122 kS/s sample rate)
External triggered/gated burst input
Level
TTL compatible
Pulse width
100 ns minimum
Slope
Positive/negative selectable
Trigger delay
0.0 ns to 85.000 s
Resolution
100 ps or 5 digits
Jitter (RMS), typical
Burst: <500 ps (Trigger input to signal output)
10 MHz reference input
Impedance
1 kΩ , AC coupled
Required input voltage swing
100 mVp-p to 5 vp-p
Lock range
10 MHz ±35 kHz

Auxiliary output characteristics

Trigger output
Level
Positive TTL level pulse into 1 kΩ
Impedance
50 Ω
Jitter (RMS), typical
500 ps
Max frequency

4.9 MHz (4.9 MHz to 20 MHz: A fraction of the frequency is output)

Common characteristics

Remote programming
(GPIB, LAN 10BASE-T/100BASE-TX, USB 1.1, compatible with SCPI-1999.0 and IEEE 488-2 standards)

Characteristic USB LAN3 GPIB3
Function change 95 ms 103 ms 84 ms
Frequency change 2 ms 19 ms 2 ms
Amplitude change 60 ms 67 ms 52 ms
Select user ARB 88 ms 120 ms 100 ms
Data download time for 4k point ARB waveform data (8 KB), typical 20 ms 84 ms 42 ms

System characteristics

Frequency setting resolution
1 μHz or 12 digits
Phase (except DC, Noise, Pulse)
Range
–360° to +360°
Resolution

Sine: 0.01°

Other Waveforms: 0.1°

Internal noise add
When activated, output signal amplitude is reduced to 50%
Level
0.0% to 50% of amplitude (Vp-p) setting
Resolution
1%
Main output
50 Ω
Internal frequency response
Stability

All except ARB: ±1 ppm, 0 °C to 50 °C

ARB: ±1 ppm ±1 μHz, 0 °C to 50 °C

Aging
±1 ppm per year
Power source
100 V to 240 V, 50 Hz to 60 Hz or 115 V, 400 Hz
Power consumption
60 W
Warm up time, typical
20 minutes
Power on self diagnostics, typical
<10 s
Accoustic noise, typical
<50 dBA
Display
3.5 in. Color TFT LCD
User interface and help language
English, French, German, Japanese, Korean, Simplified and Traditional Chinese, Russian (user selectable)

Physical characteristics

Dimensions
Height
104.2 mm (4.10 in.)
Width
241.8 mm (9.52 in.)
Depth
419.1 mm (16.50 in.)
Weight
Net
2.87 kg (6.3 lb.)
Shipping
4.72 kg (10.4 lb.)

EMC, environmental, and safety characteristics

Temperature
Operating
0 °C to +50 °C
Non-operating
-30 °C to +70 °C
Humidity
Operating

≤80%, +0 °C to +40 °C, noncondensing

≤60%, +40 °C to +50 °C, noncondensing

Non-operating

5% to 90%, <+40 °C, noncondensing

5% to 80%, ≥+40 °C to ≤+60 °C, noncondensing

5% to 40%, >+60 °C to ≤+70 °C, noncondensing

Altitude
Operating
Up to 3,000 m (9,842 ft.)
Non-operating
Up to 12,000 m (39,370 ft.)
EMC compliance
EU Council Directive 2004/108/EC
Safety

UL61010-1; 2004

CAN/CSA C22.2 No. 61010-1; 2004

EN61010-1; 2001

IEC61010-1; 2001

Ordering information
Models
AFG2021 Arbitrary/function generator
Includes: User manual, power cord, USB cable, CD-ROM with programmer manual, service manual, Labview and IVI
Drivers, CD-ROM with ArbExpress® software, NIST-traceable calibration certificate.
Please specify power cord and local language for user manual when ordering.

Instrument options
Configuration options
Opt GL GPIB and LAN interfaces
Language options
Opt. L0 English manual
Opt. L1 French manual
Opt. L2 Italian manual
Opt. L3 German manual
Opt. L4 Spanish manual
Opt. L5 Japanese manual
Opt. L6 Portuguese manual
Opt. L7 Simplified Chinese manual
Opt. L8 Traditional Chinese manual
Opt. L9 Korean manual
Opt. L10 Russian manual
Opt. L99 No manual
Language options include translated front-panel overlay for the selected language(s).
Power plug options
Opt. A0 North America power plug (115 V, 60 Hz)
Opt. A1 Universal Euro power plug (220 V, 50 Hz)
Opt. A2 United Kingdom power plug (240 V, 50 Hz)
Opt. A3 Australia power plug (240 V, 50 Hz)
Opt. A5 Switzerland power plug (220 V, 50 Hz)
Opt. A6 Japan power plug (100 V, 50/60 Hz)
Opt. A10 China power plug (50 Hz)
Opt. A11 India power plug (50 Hz)
Opt. A12 Brazil power plug (60 Hz)
Opt. A99 No power cord
AFG2021 Arbitrary/Function Generator Datasheet

Service options
Opt. C3 Calibration Service 3 Years
Opt. C5 Calibration Service 5 Years
Opt. D1 Calibration Data Report
Opt. D3 Calibration Data Report 3 Years (with Opt. C3)
Opt. D5 Calibration Data Report 5 Years (with Opt. C5)
Opt. R5 Repair Service 5 Years (including warranty)
Opt. R5DW Repair Service Coverage 5 Years (includes product warranty period). 5-year period starts at time of instrument purchase
Accessories Recommended accessories
RMU2U Rackmount kit
013-0345-00 Fuse adapter, BNC-P to BNC-R
159-0454-00 Fuse set, 3 pcs, 0.125 A
012-0482-00 BNC cable shielded, 3 ft.
012-1256-00 BNC cable shielded, 9 ft.
012-0991-00 GPIB cable, double shielded
011-0049-02 50 Ω BNC terminator

Warranty
Three-year warranty on parts and labor

    회사명

    부서명

    구매문의판매문의렌탈문의수리문의교정문의

    전화상담방문상담견적서상담

    문의 및 요청내용 *

    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.