리퍼비시 계측기
리퍼비시 계측기
FNS-AX4-B63
- ModelFNS-AX4-B63
- MakerNoiseken
- DescriptionFast Transient / Burst Simulator
- Rental문의요망
- Stock문의요망
- IEC 61000-4-4 Ed.3 standard compliance.
- Pre-check function equipped, making. inspection before testing easier.
- Normal mode test support. for testing for real field troubles. (option)
- Utilize an outlet box that simplifies EUT connection. (option)
- Compared with conventional products, the size has become compact. (Approximately 67% by volume)
- Easy to understand Panel display reduces mistakes in connecting power cables.
- Windows compatible software control. (option)
- Next calibration date notification. (Windows software only)
- LCD screen with multi-language support and enhanced operability.
- Maximum output voltage of 5 kV and maximum pulse frequency of 2 MHz allowing to test above the standard test level.
- CDN capacity is increased to single phase type AC 240 V 20 A, single and three phase type to AC 600 V 63 A, supporting a wider range of EUTs.
- Large capacity CDN (100 A or 150 A) option available for Injection test on various EUTs.
- Using coupling clamps and EMS probe kit, allows to test signal lines and evaluate noise immunity on PCBs. (option)
■ Generator specifications
| Parameter | Specification / Function |
|---|---|
| Output voltage | 200 to 5000 V 10 V Step |
| Polarity | Positive or negative, polarity alternation possible per burst |
| Repetition frequency | 0.1 kHz to 2000 kHz 0.1 kHz to 1 kHz / 0.01 kHz step Tolerance ± 5%, 1.0 kHz to 10 kHz / 0.1 kHz step Tolerance ± 5% 10 kHz to 100 kHz / 1 kHz step Tolerance ± 5%, 100 kHz to 1000 kHz / 10 kHz step Tolerance ± 5% 1000 kHz to 2000 kHz / 100 kHz step Tolerance ± 10%, (Limitation per voltage levels when continuous output) |
| Number of pulses | 1 to 1000 at a step of 1 pulse , Setting limit: 1 pulse per ms in a burst (repetition frequency 1 kHz or more) |
| Burst duration | Formula for Burst duration = Pulse number / Repetition Frequency Scope of manually setting value for burst duration: 0.01 to 999 ms |
| Burst period | 10 to 1000ms ± 10% 10ms steps (500ms or more for polarity alternate mode) |
| Polarity alternate function | Output polarity alternated between positive and negative at each burst period Setting condition: the burst period is 500ms or more and the burst pause period [ (burst period) – (burst duration)] is 100ms or more Maximum test time: 10 minutes |
| Continuous Pulse output | Up to 1000 V -10 kHz or less, to 2000 V -4 kHz or less, to 5000 V -1 kHz or less. Maximum test time for each case: 10 min |
| Frequency modulation | Frequency is shifted continuously between set frequency and approximately -10% from the set frequency. The modulating wave is triangular wave of approximately 20Hz |
| External trigger | External trigger input invokes 1 burst output in synchronization with the trigger input. Trigger specification: Hi (+ 5V) → Lo (0 V) triggers one burst period. |
| Pulse waveform (at 50 Ω load) | Pulse peak voltage: (set voltage / 2) ± 10% Rise time: 5 ns ± 30% Pulse width: 50 ns ± 30% |
| Pulse waveform (at 1 kΩ load) | Pulse peak voltage: (set voltage x 0.95) ± 20% Rise time: 5 ns ± 30% Pulse width: 35 to 150 ns |
| DC blocking capacitor | 10nF ± 20% |
■ CDN specifications
| Parameter | Specification / Function |
|---|---|
| Power capacity | A 20 model: single phase AC 240 V / 20 A, DC 125 V / 20 A (10 A for PE) B 63 model: three-phase AC 600 V / 63 A, DC 125 V / 63 A (10 A for N / PE) |
| Applied phase | A20 model: L / N / PE B63 model: L1 / L2 / L3 / N / PE Single line or all lines can be specified individually for each phase |
| Injection mode | Common mode (Normal mode available using option) |
| EUT Line input/output | φ6 mm safety socket |
| Coupling capacitor | 33 nF |
| Output waveform specification | Pulse peak voltage: (set voltage) / 2 ± 10% Rise time: 5.5 ns ± 1.5 ns Pulse width: 45 ns ± 15 ns Set voltage ± 4000 V, frequency specified from 5 kHz to 100 kHz |
| Input residual voltage | 10% or less of setting pulse voltage EUT line input is 50 Ω termination, line output is defined as open |
| AC Line Sync | Synchronous and asynchronous setting available. Setting phase angle: 0 to 360 ° ± 10 ° 1 °Step Synchronizable voltage: AC 85 V to rated voltage Reference phase: between L-N (A20 model), L1-L2 (B63 model) |
■ Other specifications
| Parameter | Specification / Function |
|---|---|
| Emergency stop | Push lock type switch (Test stop, EUT line OFF) |
| EUT FAIL function | FAIL signal from external (Hi → Lo) detected during test FAIL signal specifications VLO: 0 V, VHI: + 5 V Choose operation from test stop / pause when triggered 3 channels available for the FAIL input |
| External interface | REMOTE (For external PC control), CDN I/F (For external CDN), INDICATOR (For Warning Lamp or indicator lamp) EUT FAIL INPUT (For temporary pause at EUT failure event) |
| Accessories | Power Cable, SG Cable, Line Input Cable, Output Cable, Waveform Check Connector, Coaxial Cable, Operation Manual, Accessoriesies bag |
| Operating environment | Temperature 15 to 35 °C Relative humidity 25 to 75% |
| External Dimensions / Weight | (W)430 x (H)199 x (D)370 mm (excluding protrusions) / Approximately 14 kg (A20 model) and 22 kg (B63 model) |
| Power supply | AC 100 to 240 V ± 10% 50/60 Hz approx. 120 VA |
