리퍼비시 계측기

리퍼비시 계측기

LabTool-48UXP

  • ModelLabTool-48UXP
  • MakerAdvantech
  • DescriptionLabTool-48UXP Intelligent Universal Programmer
  • Rental문의요망
  • Stock문의요망
Data Sheet

Features

  • USB or parallel port interface with auto-switch power
  • Support 5V and 3.3V low voltage devices, 1.8V chip support through low voltage adapter.
  • Less then 2 seconds per Mbit Programming speed for high density flash chip.
  • No adapter required for DIL chip up to 48-pin
  • 48-pin universal pin driver and current limit
  • Auto-sense/ Self programming with statistical report
  • Device insertion /continuity check
  • Universal adapter for 44-pin PLCC/ QFP/ TQFP/PSOP and 40/48 TSOP
  • Supports OS :
    Parallel port: Windows 2000 / XP / Vista(32bit) / 7(32bit) / 8.1(32bit) / 10(32bit)
    USB port: Windows 2000 / XP / Vista(32bit) / 7 / 8.1 / 10
  • Automatic EPROM/ Flash ID search
  • Serialization for Memory/μP chip
  • Memory buffer H / L byte swap
  • Project file save / load function
  • User-selectable verify Vcc with one or two-pass verify voltage
  • Automatic file format detection and conversion
  • User-changeable programming parameters
  • 1 year warranty
  • Software update via web

Socket and pin driver

 

  • 48-pin DIL/ ZIF socket with receptacle for 8-pin to 48-pin 300/ 600-mil devices.
  • Four DACs for Vcc, Vpp1, Vpp2 and Vpp3 with 8-bit resolution. Software controllable rises time and current limit protection.
  • Logic driver supports pull-up/ pull-down or high impedance on all 48 pins with 2.0V-5V level.

Device support

 

  • Memory : PROM, EPROM, EEPROM, Flash, Serial PROM, NVRAM
  • Logic: PAL, GAL, CEPAL, PEEL, CDLD, EPLD
  • Others: OTP/Flash Micro-controllers

Device operations

 

  • Read, blank check, device insertion/ contact check, verify, checksum, EPROM ID check, compare, erase chip, function test, program, memory protect, device configuration setting, device search, edit buffer, mass production mode, modify vector, serialization, H/L byte buffer swap, buffer search.

PLD vector tester

 

  • Accepts JEDEC test vectors up to 48 pins
  • 2500V/usec. rise time
  • File format conversion
  • JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola S, HP 64000ABS, Straight Hex and TEKTRONIC Hex, Automatic detection and conversion.

PC system requirements

 

  • Operating system:
    Parallel port: Windows 2000 / XP / Vista(32bit) / 7(32bit) / 8.1(32bit) / 10(32bit)
    USB port: Windows 2000 / XP / Vista(32bit) / 7 / 8.1 / 10
  • Processor: Pentium and above
  • 128 MB RAM minimum, 512 MB recommended
  • Hard disk with 100 MB free space
  • Parallel port with EPP mode or USB port
  • CD ROM driver

General

 

  • Power: 100 to 240 VAC, auto-switching
  • Frequent range : 47 to 63 Hz
  • Power consumption : 25 W
  • Operating temperature: 5 to 45 ℃ (41 to 113℉)
  • CE & LVD certified
  • Weight: 1.8KG

    회사명

    부서명

    구매문의판매문의렌탈문의수리문의교정문의

    전화상담방문상담견적서상담

    문의 및 요청내용 *

    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.