리퍼비시 계측기
리퍼비시 계측기
MS2720T – 9/732
- ModelMS2720T
- MakerAnritsu
- DescriptionSpectrum Master , 9 kHz to 32 GHz
- Option9/732
- Rental문의요망
- Stock문의요망
Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, and 20 GHz
- Broadband preamplifiers over the whole frequency range for increased sensitivity approximately 17 dB
- Three Sweep Modes: improved sweep speed, up to 100 times faster
- Resolution and Video Bandwidths from 1 Hz to 10 MHz
- New triggering choices, including hysteresis, hold-off, and delay
- More zero-span capabilities including 10 MHz RBW & VBW
- Enhanced Spectrum Analyzer Touch Screen GUI, including large marker display choice
- Choice of display options for readability: normal, black on white, night vision, color on white, or high contrast
- On-screen Interference Mapping as part of the Interference Analysis option
- LTE Measurements up to 20 MHz, plus support for Carrier Aggregation
- 30 MHz wide Zero-Span IF Output at 140 MHz center frequency for external demodulation of virtually any wideband signal
- Burst detect captures 200 μs bursts the first time, every time
- PIM Hunting for finding external IM products
| Frequency Range | 9 kHz to 32 GHz |
| Dynamic Range | >106 dB in 1 Hz bandwidth at 2.4 GHz |
| Phase Noise | -112 dBc/Hz @ 10 kHz offset at 1 GHz |
| RF Connectors | N (f) for option 709, 713 and 720. Ruggedized K(m) for options 732 and 743 |
| Input Attenuation | 0 to 65 dB in 5 dB steps |
| Amplitude Accuracy | ±0.5 dB typical |
| Frequency Accuracy | Aging: ± 1.0 ppm/10 years Accuracy: ± 0.3 ppm (25 °C ± 25°C) + aging |
MS2720T-0709 Frequency Range 9 kHz to 9 GHz
MS2720T-0713 Frequency Range 9 kHz to 13 GHz
MS2720T-0720 Frequency Range 9 kHz to 20 GHz
MS2720T-0732 Frequency Range 9 kHz to 32 GHz
MS2720T-0809 9 GHz Tracking Generator (requires Option 709)
MS2720T-0813 13 GHz Tracking Generator (requires Option 713)
MS2720T-0820 20 GHz Tracking Generator (requires Option 720)
MS2720T-0025 Interference Analyzer (Option 31 is recommended)
MS2720T-0027 Channel Scanner
MS2720T-0431 Coverage Mapping (requires Option 31 for full functionality)
MS2720T-0444 EMF Measurements (requires Anritsu Isotropic Antenna)
MS2720T-0509 AM/FM/PM Measurements (Option 431 required for full functionality)
MS2720T-0024 I/Q Waveform Capture (requires Option 9)
MS2720T-0089 Zero-Span IF Output
MS2720T-0090 Gated Sweep
MS2720T-0019 High Accuracy Power Meter (requires USB Power Sensor, sold separately)
MS2720T-0009 Demodulation Hardware
MS2720T-0880 GSM/GPRS/EDGE Measurements (requires Option 9)
MS2720T-0881 W-CDMA/HSPA+ Measurements (requires Option 9, Option 31 recommended)
MS2720T-0882 TD-SCDMA/HSPA+ Measurements (requires Option 9, Option 31 required for full functionality)
MS2720T-0883 LTE/LTE-A FDD/TDD Measurements (requires Option 9, Option 31 required for full functionality)
MS2720T-0886 LTE 256 QAM Demodulation (requires Option 883)
MS2720T-0887 NB-IoT Measurements (requires Option 9)
MS2720T-0884 CDMA/EV-DO Measurements (requires Option 9, Option 31 required for full functionality)
MS2720T-0885 WiMAX Fixed/Mobile Measurements (requires Option 9, Option 31 required for full functionality)
MS2720T-0007 Secure Data Operation
MS2720T-0031 GPS Receiver (requires GPS Antenna, sold separately)
MS2720T-0098 Standard Calibration to ISO17025 and ANSI/NCSL Z540-1. Includes calibration certificate.
MS2720T-0099 Premium Calibration to ISO17025 and ANSI/NCSL Z540-1. Includes calibration certificate, test report, and
uncertainty data.
