Specifications

• Signal Characteristics:
  • 9 kHz to 3 or 6 GHz
  • +21 dBm specified power to 3 GHz with electronic attenua
  • < 900-µs simultaneous switching of frequency, power, and waveform type
  • ≤ -73 dBc ACP W-CDMA 64 DPCH and <0.4% EVM 80 MHz 802.11ac
• Modulation and Sweep:
  • AM, FM, ØM, and narrow pulse
  • 10 MHz multifunction generator and LF out
  • Digital step and list sweep modes
  • l/Q modulation: ASK, FSK, MSK, PSK, QAM, custom I/Q
• Baseband Generation and Signal Creation:
  • 120 MHz internal baseband generator (±0.2 dB flatness): arbitrary waveform and real-time I/Q
  • 512 Msample playback memory and 30 GB internal or 8 GB external, removable memory
  • Arbitrary and real-time signals: LTE, HSPA+, WLAN, GNSS, DVB, and more
  • Multi-channel baseband generation with N5102A digital I/O, MIMO, and RF fading with PXB basebamd generator and channel emulator
• Automation and Communication Interface:
  • 1000BaseT LAN, LXI, USB 2.0, and GPIB
  • SCPI, IVI-COM, MATLAB drivers
  • Backward compatible with all ESG, MXG, PSG, and 8648x signal generators
  • Agilent USB power sensor compatible with embedded display and SCPI control
• Frequency Specifications:
  • Frequency:
    • Frequency Range:
      • Option 503:  9 kHz to 3 GHz
      • Option 506:  9 kHz to 6 GHz
    • Resolution:  0.01 Hz
    • Phase Offset:  Adjustable in nominal 0.1 ° increments
  • Frequency Switching Speed:
    • CW Mode:
      • SCPI Mode:  ≤ 5 ms, typical
      • List / Step Sweep Mode:  ≤ 5 ms, typical
    • Digital Modulation On:
      • SCPI Mode:  ≤ 5 ms, typical
      • List / Step Sweep Mode:  ≤ 5 ms, typical
  • Frequency Reference:
    • Accuracy:
      • Internal Time Base Reference Oscillator Aging Rate: 
        • ≤ ± 5 ppm/10 yrs
        • < ± 1 ppm/yr, nominal
      • Adustment Resolution: < 1 x 10^-10, nominal
      • Temperature Effects:  ± 1 ppm (0 to 55 °C), nominal
      • Line Voltage Effects:  ± 0.1 ppm, nominal; 5% to –10%, nominal
    • Reference Output:
      • Frequency:  10 MHz
      • Amplitude:  ≥ +4 dBm, nominal into 50 Ω load
    • External Reference Input:
      • Input Frequency, standard:  10 MHz
      • Input Frequency, Opt 1ER:  1 to 50 MHz (in multiples of 0.1 Hz)
      • Lock Range:  ± 1 ppm
      • Amplitude:  > -3.0 to 20 dBm, nominal
      • Impedance:  50 Ω, nominal
      • Waveform:  Sine or square
    • Sweep Modes (Frequency and Amplitude):
      • Operating Modes: 
        • Step Sweep:
          • equally spaced frequency and amplitude
          • or logarithmically spaced frequency steps
        • List sweep:  arbitrary list of frequency and amplitude steps
      • Sweep Range:  Within instrument frequency range
      • Dwell Time:  100 μs to 100 s
      • Number of Points:
        • Step Sweep:  2 to 65535
        • List Sweep:  1 to 3201
      • Step Change:  Linear or logarithmic
      • Triggering:  Free run, trigger key, external, timer, bus (GPIB, LAN, USB)
  • Amplitude Specifications:
    • Output Parameters:
      • Settable Range:  +30 to –144 dBm
      • Resolution:  0.01 dB, nominal
      • Step Attenuator:  0 to 130 dB in 5 dB steps electronic type
      • Connector:  Type N 50 Ω, nominal
    • Maximum Output Power:
      • Frequency:
        • 9 kHz to 10 MHz:
          • Standard:  +13 dBm
          • Option 1EA:  +17 dBm
        • > 10 MHz to 3 GHz:
          • Standard:  +18 dBm
          • Option 1EA:  +21 dBm
        • > 3 to 6 GHZ:
          • Standard:  +16 dBm
          • Option 1EA:  +18 dBm

N51x2B-1EA 높은 출력 파워
N51x2B-503 주파수 범위. 9 kHz ~ 3 GHz
N51x2B-403 Calibrated AWGN
N5172B-653 ARB baseband generator (60 MHz RF bandwidth, 32 Msa)
N5172B-655 Upgrade baseband generator from 60 to 120 MHz RF bandwidth
N5172B-UNV Enhanced dynamic range