리퍼비시 계측기
리퍼비시 계측기
P300
- ModelP300
- MakerThe Moving Pixel Company
- DescriptionInputs Probe
- Rental문의요망
- Stock문의요망
The P300 Inputs probe provides a method for communicating user clock and user event
information to the PG module. The P300 is not necessary for operation of the unit.
Further, a user need not even connect the P300 to the PG module. Note that in the Quick
Start (4.3 above), there is no mention of the P300.
Table 4: PG Electrical and Mechanical
Characteristic Description
PG3AMod module version of pattern generator
Slot Width Requires two mainframe slots
Weight, approximate 2.0 kg
Overall dimensions, approximate Depth: 375mm, Width 275mm, Height: 65mm
Power, maximum 80 W, drawn from TLA mainframe
PG3ACab cabinet (stand-alone) version of pattern generator
Weight, approximate 4kg
Overall Dimensions, approximate Depth: 400mm, Width: 305mm, Height: 97mm
Power, maximum 100 W
Voltage 100 – 240 VAC, 50-60 Hz
Power Factor Correction Active, meets EN61000-3-2
Fuse
110V nominal operation 1 amp Slowblow, 250 V or equivalent,
1.25 inch x 0.25 inch : F1A, 250VAC
220V nominal operation 2 x 1 amp slow blow, 250V
5 mm x 20 mm: F1A, 250VAC
Misc
P300 Dimensions 125mm x 75mm x 30mm approx without leadset
P300 weight About 115 grams without leadset or input cable
Cable from module to output probe Approximately 1500 mm
Table 5: PG Shipping Container Materials
Material Amount
Cardboard (paper) ~1320 grams
Polyethylene (expanded foam) ~165 grams
Urethane foam pads ~115 grams
Shipping container dimensions 485mm x 420mm x 305mm
