리퍼비시 계측기

리퍼비시 계측기

P6231 

  • ModelP6231
  • MakerTektronix
  • Description1.5Ghz Vaiable Offset Probe
  • Rental문의요망
  • Stock문의요망
Data Sheet

The Tektronix P6230 and P6231 are passive ×10 (450:50 Ω) probes with 1.5 GHz bandwidth and DC offset capability, intended to minimize DC probe-loading effect when used on logic circuits.

The P6230 has an offset control potentiometer in the termination box and connects to the scope, e.g. 7000 series scopes, through a BNC connector with ×10 readout pin. It can be powered from 7000 series mainframes having LEMO S-series connectors for probe power, or compatible units such as the 1101.

The P6231 is a TekProbe Level 2 probe intended for 11000 series plugins such as the 11A32 or 11A71. Offset control and power are provided by the scope mainframe through a Tekprobe BNC connector.

The P6230/6231 shares accessories with many other Tektronix subminiature modular probes although the input hybrid is unique. Tip color is yellow, connector end color is blue, part number 206-0279-00. Its end to end resistance is 400 Ω.

 

 

 

 

Description

The Tektronix P6231 is a Low Circuit Loading Signal Acquisition probe for CSA, DSA, 11000 Series, and the TDS Family of Oscilloscopes.

The Tektronix P6231 Bias/Offset probe acts as a standard 500 Ω passive divider voltage with the additional capability of having an adjustable tip nulling voltage. This feature reduces the DC-Loading effects of the probe when it is used to measure signals whose mid-voltage value is not at zero volts, or in circuits where the termination impedance is not returned to ground level. The Input Bias/Offset Voltage may be adjusted so that the voltage at the probe input resistor is equal to the test signal potentional; thus, no DC current flows through the probe’s input resistor.

These Active Probes may also be used with 50 Ω or 1 MΩ oscilloscope systems, with conventional BNC interfaces, via the 1103 TEKPROBE Power Supply. The 1103 has dual TEKPROBE inputs, dual BNC signal outputs, and dual voltage offset on/off switches and potentiometer

 

Key Specifications

Bandwidth DC to ≥ 1.5 GHz
Rise time ≤ 230 ps
Attenuation 10×
Input Impedance 450 Ω // 1.3 pF (1.6 pF guaranteed)
Signal delay 8.7 ± 0.1 ns
DC offset –5 V ≤ (Vsignal + Voffset) ≤ +5 V
Features
  • Readout Pin
  • Switchable 50 Ω termination

    회사명

    부서명

    구매문의판매문의렌탈문의수리문의교정문의

    전화상담방문상담견적서상담

    문의 및 요청내용 *

    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.