리퍼비시 계측기
리퍼비시 계측기
The P6417 and P6418 logic analyzer probes connect a Tektronix TLA series
logic analyzer to a target system. Each probe consists of 16 data channels and
one clock/data channel. You can connect the probes to the target system through
the podlet connectors or through the lead sets.
Table 2 lists the electrical and mechanical specifications for the P6417 and
P6418 probes. The electrical specifications apply when the probe is connected
between a compatible logic analyzer and a target system. All specifications apply
to both types of probes unless otherwise indicated.
Table 2: Electrical and mechanical specifications
Characteristic Description
Threshold accuracy ± 100 mV
Channel-to-channel-skew ≤ 1 ns
Input resistance (probe and lead sets)
Standard lead set 20 KΩ
Reduced bias lead set 10 KΩ
Input capacitance P6417 P6418
Data 2.0 pF typical 1.4 pF typical
Clock/Qual 2.0 pF typical 2.0 pF typical
Minimum slew rate 0.2 ns
Maximum operating signal 6.5 VP-P
–3.5 V absolute input voltage minimum
6.5 V absolute input voltage maximum
Maximum nondestructive input
signal to probe
± 15 V
Minimum input pulse width
signal
2 ns
Delay from probe tip to module input connector
7.33 ns
Probe length 1.8 m (6 ft)
