리퍼비시 계측기
리퍼비시 계측기
TCPA300 -A1
- ModelTCPA300
- MakerTektronix
- DescriptionOscilloscope Probe Amplifier
- OptionA1
- Rental문의요망
- Stock문의요망
The Tektronix TCPA300 oscilloscope probe amplifier is a highly advanced current measurement system. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC) or TekVPI (w/TPA-BNC) interfaces offer a wide current measurement capability, from low-level milliamp measurements to high current levels. It can also be used with non-Tekprobe systems to make proper current measurements, by multiplying the measured output voltage on the oscilloscope by the TCPA300 range setting.
Note:
Requires Tektronix TCP305 ( 628-7534 ) or TCP312 ( 499-592 ) current probe, available separately.
Supplied with instruction/service manual, TEKPROBE interface cable, Male-to-Male BNC cable (50O), 50O feedthrough termination, Certificate of Traceable Calibration.
DC to 100MHz: Current Probe Amplifier
Automatic scaling and units 1 – Oscilloscope on-screen readout of magnitude and amps reduces measurement errors with no more hand calculations
AC/DC input coupling
Low insertion impedance reduces device under test loading
Split-core construction allows easy circuit connection
Status indicators provide visual operating status and notification of potential error conditions – degauss, probe open, overload, not terminated into 50ohm, no compatible probe type
Lower DC drift and noise allow improved low level current measurements
Ordering Information
TCP312 Probe; AC/DC Current, DC to 100 MHz; 30 A DC (Requires TCPA300 Amplifier)
TCP305 Probe; AC/DC Current, DC to 50 MHz; 50 A DC (Requires TCPA300 Amplifier)
TCP303 Probe; AC/DC Current, DC to 15 MHz; 150 A DC (Requires TCPA300 Amplifier)
TCP404XL Probe; AC/DC Current, DC to 2 MHz; 500 A DC (750 A DC Derated With Duty Cycle)
(Requires TCPA400 Amplifier)
All TCP300/TCP400 Current Probes Include: AC/DC Current Probe; Instruction
Sheet; Probe Cover; Certificate of Traceable Calibration
TCPA300 Amplifier; AC/DC Current Probe, DC to 100 MHz, (Requires TCP305 or TCP312 or
TCP303 Probes)
TCPA400 Amplifier; AC/DC Current Probe, DC to 50 MHz, (Requires TCP404XL Probe)
All TCPA300/TCPA400 Current Probe Amplifiers Include: AC/DC Current Probe
Amplifier; Instruction/Service Manual; TEKPROBE Interface Cable; Male to Male
BNC cable (50 Ω); 50 Ω feed-through termination; Certificate of Traceable Calibration
Options
TCPA300/TCPA400
Power Plug Options
Opt. A1 – Euro Plug, 220 V, 50 Hz
Opt. A2 – UK Plug, 240 V, 50 Hz
Opt. A3 – Australian Plug, 240 V, 50 Hz
Opt. A5 – Swiss Plug, 220 V, 50 Hz
Opt. A6 – Japanese Plug, 100 V, 110/120 Volt, 60 Hz
Opt. AC – China Plug, 50 Hz
Opt. A99 – No Power Cord
Language Options
L5 – Japanese Manual
All TCP300/TCPA300/TCP400/TCPA400 Series
Service Options
Opt. C3 – Calibration Service 3 Years
Opt. C5 – Calibration Service 5 Years
Opt. D1 – Calibration Data Report
Opt. D3 – Calibration Data Report 3 Years (with Option C3)
Opt. D5 – Calibration Data Report 5 Years (with Option C5)
Opt. R3 – Repair Service 3 Years
Opt. R5 – Repair Service 5 Years
