리퍼비시 계측기
리퍼비시 계측기
Type 4382 Accessory
- ModelType 4382 Accessory
- MakerB&K
- DescriptionType 4382 Accessory
- Rental문의요망
- Stock문의요망
Type 4382 features a 10 – 32 UNF receptacle for output connection and can be mounted on the object with a 10 – 32 UNF threaded steel stud.
USE SCENARIOS
- General-purpose
- High sensitivity
- Low-level, low-frequency measurement
- Vibration testing and analysis
CHARACTERISTICS
This piezoelectric accelerometer may be treated as a charge source. Its sensitivity is expressed in terms of charge per unit acceleration (pC/g).
The DeltaShear design involves three piezoelectric elements and three masses arranged in a triangular configuration around a triangular center post.
The ring pre-stresses the piezoelectric elements to give a high degree of linearity. The charge is collected between the housing and the clamping ring. The piezoelectric element used is a PZ 23 lead zirconate titanate element.
The housing material is titanium.
CALIBRATION
The sensitivity given in the calibration chart has been measured at 159.2 Hz and an acceleration of 10 g. For 99.9% confidence level, the accuracy of the factory calibration is ± 2%.
0.1 – 8400 HzTemperature-74 – 250 ℃Weight17 gramSensitivity3.16 pC/ms^-2Residual Noise Level in Spec Freq Range (rms) ±0.06 mgMaximum Operational Level (peak)2000 gConnector10-32 UNFMountingStudAccessory IncludedAO 0038Clip/Stud/Screw includedYQ 2960OutputCharge-PEUnigainYesTriaxialNoTEDSNoApplicationsGeneral PurposeUnitpCResonance frequency28 kHzMaximum Shock Level (± peak)5000 g
