리퍼비시 계측기

리퍼비시 계측기

ZNB8 – 4 포트 B14 B15

  • ModelZNB8
  • MakerR&S
  • Description벡터 네트워크 분석기
  • Option4 포트 B14 B15
  • Rental문의요망
  • Stock문의요망
Data Sheet

벡터 네트워크 분야에서 60년 이상의 현장 경험을 쌓은 로데슈바르츠는 ZNB 시리즈 벡터 네트워크 분석기로 이 분야의 새로운 기준을 세웠습니다. 이 제품의 주요 특징은 초 고속으로 측정하며, 초 정밀하고, 그리고 아주 쉽게 사용할 수 있다는 점이 특징입니다.

Designed to meet the highest standards

  • Wide dynamic range from 9 kHz for fast measurements on high-blocking DUTs
  • Excellent raw data for high basic accuracy
  • High temperature stability for long calibration intervals
  • Fast synthesizers for high measurement speed

 

Convenient characterization of active and passive RF components

  • Fast embedding/de-embedding for impedance matching using virtual networks
  • Mixed-mode S-parameters for balanced DUT characterization
  • Redefined S-parameters for flexible test setup configuration
  • Extensive analysis functions for efficient trace analysis
  • Amplifier measurements with wide power sweep range and receiver step attenuators
  • Time domain analysis for distance-to-fault (DTF) measurements and filter adjustment
  • Frequency conversion measurements on mixers and amplifiers – fast and simple with two independent internal generators

 

Simple calibration – manual or automatic

  • The right calibration method for every test application
  • TSM (Through, Short, Match) – full calibration in only five steps
  • Automatic calibration units with up to 24 ports

 

Network analysis made easy

  • Flat and clear menu structures for efficient operation
  • Optimal display configuration for each measurement task

 

High throughput in production

  • Short measurement times
  • High measurement speed due to wide dynamic range and optimized IF bandwidths
  • Segmented sweep tailored to device under test
  • Fast switching between instrument setups
  • Handler I/O interface for control of external parts handlers
  • GPIB interface with bidirectional data transfer saves time in production

 

Measurements with up to 48 ports

  • Expanding the number of ports with switch matrices
  • RFFE GPIO interface for direct control of frontend modules
  • Easy configuration at the push of a button
  • Fast measurements and excellent RF characteristics
  • Matrix solutions for every application

 

A worthwhile investment

  • Ready for the future
  • Upgrading test systems without rewriting system software
  • An analyzer that speaks the user’s language
  • 9 kHz ~ 40 GHz의 주파수 범위
  • 최대 140 dB의 넓은 동적 범위
  • 짧은 스윕 시간 : 예) 401 포인트에 대해 4 ms
  • 높은 온도 안정성 0.01 dB/°C
  • 98 dB의 넓은 전력 스윕 범위
  • 1 Hz ~ 10 MHz 범위의 다양한 IF 대역폭
  • 수동 및 자동 교정
  • 대형, 고해상도 12.1″화면
  • 터치 스크린 사용자 인터페이스
  • 2개 또는 4개의 포트
  • 2개의 독립 발전기가 있는 4포트 모델
  • 스위치 매트릭스를 사용하여 최대 48개의 포트로 확장
Hardware Options –
Receiver Step Attenuator		 ZNB4-B31 Receiver Step Attenuator, Port 1, for ZNB4
Frequency range: 9 kHz to 4.5 GHz
ZNB4-B32 Receiver Step Attenuator, Port 2, for ZNB4
Frequency range: 9 kHz to 4.5 GHz
ZNB4-B33 Receiver Step Attenuator, Port 3, for ZNB4
Frequency range: 9 kHz to 4.5 GHz
ZNB4-B34 Receiver Step Attenuator, Port 4, for ZNB4
Frequency range: 9 kHz to 4.5 GHz
ZNB8-B31 Receiver Step Attenuator, Port 1, for ZNB8
Frequency range: 9 kHz to 8.5 GHz
ZNB8-B32 Receiver Step Attenuator, Port 2, for ZNB8
Frequency range: 9 kHz to 8.5 GHz
ZNB8-B33 Receiver Step Attenuator, Port 3, for ZNB8
Frequency range: 9 kHz to 8.5 GHz
ZNB8-B34 Receiver Step Attenuator, Port 4, for ZNB8
Frequency range: 9 kHz to 8.5 GHz
Accessories   Overview of Accessories for Network Analyzer from Rohde & Schwarz
Hardware Options –
Extended Power Range		 ZNB4-B24 Extended Power Range for Four-Port ZNB4
Frequency range: 9 kHz to 4.5 GHz
ZNB4-B22 Extended Power Range for Two-Port ZNB4
Frequency range: 9 kHz to 4.5 GHz
ZNB8-B22 Extended Power Range for Two-Port ZNB8
Frequency range: 9 kHz to 8.5 GHz
ZNB8-B24 Extended Power Range for Four-Port ZNB8
Frequency range: 9 kHz to 8.5 GHz
ZNB20-B22 Extended Power Range for Two-Port ZNB20
Frequency range: 100 kHz to 20 GHz
ZNB20-B24 Extended Power Range for Four-Port ZNB20
Frequency range: 100 kHz to 20 GHz
ZNB40-B22 Extended Power Range for Two-Port ZNB40
Frequency range: 10 MHz to 40 GHz
Hardware Options – Other ZNB-B1 (1316.1700.02) Bias-Tees for Two-Port ZNB
Frequency range: 100 kHz to 4.5/8.5 GHz
ZNB-B1 (1316.1700.04) Bias-Tees for Four-Port ZNB
Frequency range: 100 kHz to 4.5/8.5 GHz
ZNB-B2 Second Internal Generator for Four-Port ZNB4/ZNB8 (Req. ZNB four-port model)
ZNB20-B2 SecondInternal Generator for Four-Port ZNB20 (Req. ZNB four-port model)
ZNB-B4 Precision Frequency Reference
ZNB-B10 GPIB Interface
ZNB-B12 Device Control (Req. for direct control of ZN-Z84 matrices)
ZN-B121 Direct Control Cable (Req. for direct control of ZN-Z84 matrices)
ZN-B14 Handler I/O (Universal Interface)
ZN-B15 (1323.9355.02) RFFE GPIO Interface
Cannot be combined with ZNB-B1
ZN-B15 (1323.9355.03) RFFE GPIO Interface
Includes current and voltage measurements, cannot be combined with ZNB-B1
ZNB-B19 (1323.9490.02) Additional Removable Harddisc 32 Bit
ZNB-B19 (1323.9490.07) Additional Removable Harddisc 64 Bit
ZNB-B81 DC Inputs
ZNB4-B52 Extended dynamic range for ZNB4 Two-Port instrument
Frequency range: 9 kHz to 4.5 GHz
ZNB4-B54 Extended dynamic range for ZNB4 Four-Port instrument
Frequency range: 9 kHz to 4.5 GHz
ZNB8-B52 Extended dynamic range for ZNB8 Two-Port instrument
Frequency range: 9 kHz to 8.5 GHz
ZNB8-B54 Extended dynamic range for ZNB8 Four-Port instrument
Frequency range: 9 kHz to 8.5 GHz
Software Options ZNB-K2 (1316.0156.02) Time Domain (TDR)
ZNB-K20 (1326.8072.02) Extended Time Domain Analysis
Req. ZNB-K2
ZNB-K4 Frequency Conversion
Req. ZVAB-B44 for control of external generators via the IEC/IEEE bus.
ZNB-K14 Intermodulation Measurements
Req. ZNB-K4
ZNB-K17 10 MHz Receiver Bandwidth
ZNB-K19 Freq. Resolution 1 mHz
Increases the frequency resolution of ZNB to 1 mHz
Upgrade Kits ZNB-U64 Upgrade Kit, 64-bit
Recommended Extras ZZA-KN5 19″ Rack Adapter
For mounting a 19″ housing 5 RU high in a standard 19″ rack

    회사명

    부서명

    구매문의판매문의렌탈문의수리문의교정문의

    전화상담방문상담견적서상담

    문의 및 요청내용 *

    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.